Bosch injector 968 green 465cc

Bosch 465cc Injector (green giants)

Mounted OEM on the following car models
Volvo C70 2,4T 200HP 02-05
Volvo S60R 2,5T AWD 300HP 2003-
Volvo V70 2,3 AWD 265HP 98-00
Volvo V70R 2,5T AWD 300HP 2003-

Name: Bosch 465cc
Part number: 0280155968 / 0280 155 968 / Bosch -968
Package: 1x
Connector: Bosch JPT EV1 Minitimer Jetronic
Length: 60,65mm - EV 14L (Long)
Injector tip: 11mm
O-ring top: 14mm Viton
O-ring bottom: 14mm Viton
Body diameter: 16mm
Impedance: 12,2 ohm
Spray pattern: 30 degrees
Spray angle: Neutral (0 degrees)

Max flow measured static in test environment
29 PSI (2 bar) 356cc / min = 34 lb / h
43,5 PSI (3 bar) 430cc / min = 41 lb / h
58 PSI (4 bar) 492cc / min = 47 lb / h
78,5 PSI (5 bar) 555cc / min = 53 lb / h
88 PSI (6 bar) 606cc / min = 58 Ib / h
101,5PSI (7bar) 666cc / min = 63 lb / h
(55 PSI (3,8 bar) 480cc / min = 46 lb / h)

Please note that test environment versus practical use can vary widely depending on peripheral equipment and other technical factors. However, this is excellent information on what to expect from the injectors and essential information when choosing other components in the fuel system, such as fuel pump, fuel pressure regulator, and fuel filter.

Engine power Turbo
Petrol 10% margin
1cyl - 57hp (57x1)
4cyl - 228hp (57x4)
5cyl - 285hp (57x5)
6cyl - 342hp (57x6)
8cyl - 456hp (57x8)

Ethanol 10% margin
1cyl - 49hp (49x1)
4cyl - 196hp (49x4)
5cyl - 245hp (49x5)
6cyl - 294hp (49x6)
8cyl - 392hp (49x8)

Engine power N/A
Petrol 10% margin
1cyl - 73hp (73x1)
4cyl - 292hp (73x4)
5cyl - 365hp (73x5)
6cyl - 438hp (73x6)
8cyl - 584hp (73x8)

Ethanol 10% margin
1cyl - 61hp (61x1)
4cyl - 244hp (61x4)
5cyl - 305hp (61x5)
6cyl - 366hp (61x6)
8cyl - 488hp (61x8)

Flow matching

By default, these injectors are shipped with factory tolerances, unless you opt for flow-matching. We highly recommend choosing flow-matching before the injectors are delivered. Factory tolerances for injectors can vary, and when used unmatched, they may have wider tolerances that require tuning adjustments in the engine management system. The extent of these variations from factory settings is continuously variable.

When you select the flow-matching option, it's performed using our state-of-the-art equipment. Additionally, we provide comprehensive documentation and certificates along with your new injectors.