Bosch injector 731cc

Name: Bosch 731cc S
Part number: 0280158235 / 0280 158 235 / Bosch -235
Package: 1x
Connector: Nippon / Denso / Sumitomo
Length: 48,65mm - EV 14S (Standard) Use top adapter to get 60,65mm EV 14L (Long)
Injector tip: 11mm
O-ring top: 14mm Viton
O-ring bottom: 14mm Viton
Body diameter: 16mm
Impedance: 8,5 ohm
Nozzle: 9 holes
Spray pattern: 4x Conical jets
Spray angle: Neutral (0 degrees)
Flow: 731cc/min = 500g/min = 66lb/h @ 3bar
Fuel: E85 / M100 compatible and can handle other standard fuels due to the stainless internal parts. ATTENTION! If the injector is to be run on methanol, it must be run through with regular fuel after use. These injectors must not be in contact with methanol over more extended periods.

Engine power Turbo
Petrol 10% margin
1cyl - 96hp (96x1)
4cyl - 384hp (96x4)
5cyl - 480hp (96x5)
6cyl - 576hp (96x6)
8cyl - 768hp (96x8)

Ethanol 10% margin
1cyl - 83hp (83x1)
4cyl - 332hp (83x4)
5cyl - 415hp (83x5)
6cyl - 498hp (83x6)
8cyl - 664hp (83x8)

Engine power N/A
Petrol 10% margin
1cyl - 125hp (125x1)
4cyl - 500hp (125x4)
5cyl - 625hp (125x5)
6cyl - 750hp (125x6)
8cyl - 1000hp (125x8)

Ethanol 10% margin
1cyl - 104hp (104x1)
4cyl - 416hp (104x4)
5cyl - 520hp (104x5)
6cyl - 624hp (104x6)
8cyl - 832hp (104x8)

Flow matching

By default, these injectors are shipped with factory tolerances, unless you opt for flow-matching. We highly recommend choosing flow-matching before the injectors are delivered. Factory tolerances for injectors can vary, and when used unmatched, they may have wider tolerances that require tuning adjustments in the engine management system. The extent of these variations from factory settings is continuously variable.

When you select the flow-matching option, it's performed using our state-of-the-art equipment. Additionally, we provide comprehensive documentation and certificates along with your new injectors.